基于数字图像相关方法对冲击载荷下泡沫铝全场变形过程的测试

应用分离式霍普金森压杆(以下简称SHPB)和高速摄影装置研究了冲击载荷下泡沫铝试件全场变形的测量方法。使用SHPB对泡沫铝试件进行冲击压缩实验,同时用高速摄影装置对实验过程进行全程跟踪拍摄。将得到的高速摄影图像采用数字图像相关方法进行分析,由此可得到冲击压缩过程中泡沫铝试件全场应变的分布和变化规律。此研究揭示了冲击载荷下泡沫铝试件局部化变形的发展过程,为研究泡沫铝在不同冲击载荷下不同变形模式的内在机制提供了新的可靠的方法。     

应用超声散斑相关法测量水下物内层界面位移

超声散斑相关法可应用于水下物体内层界面的位移测量,在工程建设中具有广泛的应用前景。根据所建立的测量实验系统,对位于水中的有机玻璃试件内层界面的面内位移和离面位移进行了实测,测量误差一般在7%以内。进一步研究结果表明:在刚体位移情况下,一般经粗磨、粗刨和粗铣加工或砂模铸造后的粗糙外层界面对超声散斑相关法内层界面位移测量结果的影响极小;当外层界面发生应变时,其变形前后内层界面上的散斑场的相关性将随应变量的增加而减弱,但外层界面应变小于0.05ε时,内层界面上超声散斑相关系数的减小不超过4%。     

Correlation and fractal properties of speckles in the extremely deep Fresnel diffraction region

Based on the Kirchhoff approximation and the theoretical analysis of the random light fields,the speckle intensity distributions in the extremely deep Fresnel diffraction region are simulated.The fractal property of the speckles as well as the relation between the speckle intensity distribution and the corresponding random surface is investigated.We design a microscope system to detect experimentally the speckles in the extremely deep Fresnel diffraction region,and the experimental results prove the conclusions drawn from our simulations.     

Experimental study of regional fractal speckle produced in large angle scattering

Using the interference of speckle and the spherical reference wave,we extract the real and the imaginary parts of the complex amplitudes of the speckle in large angle scattering.By calculating the spatial correlation functions of intensity,we find that the speckle has a property of regional fractality,i.e.the fractal exponent equals 1 in a small spatial region and it becomes less than 1 in a bigger region.The empirical analytic expression of the intensity correlation function is gained.The probability density distributions of the intensities and the complex amplitudes show that the regional fractal speckle still obeys zero-mean circular complex Gaussian statistics.     

深部开采对覆岩破坏移动规律的实验研究

根据淮南矿业集团潘一矿2171（1）工作面开采实践,采用相似材料模拟实验。利用电子经纬仪与数字散斑相关方法相结合监测位移,分析研究了采场上覆岩层的“三带”特征及分布规律,上覆岩层移动发展趋势、演化规律、存在范围及形态,以及与开采宽度的关系。结果表明：一定采宽后顶板垮落规律显著,断层下顶板周期断裂步距减小;岩层下沉系数与岩层高度和采厚比成线性关系,上覆岩层沉降具有非对称性;离层裂隙的发生、扩展、闭合受关键岩层的影响和控制。数据分析还表明,数字散斑相关方法具有较高的精度,这一新的研究方法引入,丰富了上覆岩层活动规律的研究手段。本文结果可为指导工程实践提供重要理论依据。     

Dynamical Mechanical Analysis and Curing Analysis of Fouling Release Coatings and Components

A commercially available fouling release (adsorbed foulants removed by shear flow) coating based on poly(dimethylsiloxane) and a commercial marine epoxy primer have been analyzed by diffusing wave spectroscopy and by thermal and dynamical mechanical methods. Diffusing wave spectroscopy reveals 7–9 distinct relaxation intervals over short (minutes) to long (20 hour) time scales. Several junctures of these intervals are shown to correlate with mechanically determined film formation parameters, such as set to touch times, tack free times, and dry through times. Thickness series of coatings made by casting illustrate similarities and distinct differences between the epoxy primer and poly(dimethylsiloxane)-based fouling release coating formulations. Several low temperature β transitions are resolved in the fouling release coatings in addition the α (T_g) transition in both formulations. A scaling analysis of the thickness series data shows that both the primer and the top coat exhibit a negative exponent for thickness; −0.77 for the epoxy; −1.2 for the top coat. Stress-strain experiments reveal further significant difference between these two types of elastomers. The elastic modulus for the epoxy is 1000-fold higher than for the topcoat. A small elastic modulus is thought to be key in the successful functioning of fouling release coatings. Analyses of substrate effects (wire mesh, fiberglass braid) and of coating or loading levels on dynamical mechanical properties, in comparison with thickness series of thin films are presented. The woven braid offers the advantage that it can be loaded more easily than can wire mesh substrates. The negative exponents show that thinner coatings may be more mechanically resilient than thicker coatings, as the ability to store and dissipate mechanical energy decreases as thickness increases.